Notch out the deck posts 120mm x 20mm up from the bottom. Or, to make this

Notch out the deck posts 120mm x 20mm up from the bottom. Or, to make this part of the project much easier and faster, you can buy these pre-notched. If you need to extend your notch further then do this using a handsaw or circular saw. Ask someone to hold the deck post in position whilst you mark the location of two evenly spaced pilot holes on the post. To fix the deck posts to the bearer, hang washers on the end of a 130mm exterior coach screw, then tighten the screws with a socket set Use a tape measure to make sure deck posts are evenly spaced, with a maximum distance of 1800mm between them. If you want the post to be flush to the decking then you will need to notch it into the decking. Start by marking out where the post will be onto the deck and the fascia. Put the post into position and check that it is flush to the decking. Then, secure the post as before and reattach the fascia. To make sure spindles are placed evenly, measure and cut a piece of spindle to 81mm and use this as a marker. Measure 81mm from the end of the rail and use a try square to mark an accurate line. This line marks where the first spindle will be placed. When you are marking the bottom railings, m...

If you want to return your Wickes product for an exchange or refund, you can do

If you want to return your Wickes product for an exchange or refund, you can do so at any time up to 30 days after receiving it.  In the unlikely event that a delivered product (including made-to-measure items) is faulty or damaged, we will exchange it or provide you with a full refund (including delivery charges), as long as we are notified of the product’s fault within 30 days of it being delivered to you. You can arrange for the product to be collected, by ourselves or nominated carrier, or return the product to your local Wickes store, with proof of purchase. Anti-Corrosion Roofing Sheets If you cancel your order within 7 days following the date of delivery, we will give you a full refund including delivery charges. If you advise us of your proposed return within 30 days (but more than 7 days) following the date of delivery we will give you a full refund excluding delivery charges. Made-to-measure products may NOT be returned unless they are deemed to be faulty or have been damaged in transit. PC Sheet, PVC Roof Sheet, FRP Sheet, Synthetic Resin Roof Tile – CO-WIN,https://www.co-winhk.com/